Use the Bagger Professor to find the machine for your application.

800 Series Paddle Flow Vertical Impeller Packer

Description

Unit Description:

Vertical Style Impeller Valve Bag Fillers for Packaging 20-110# (9-50KG) Bags with Fine Powders of Mid-Ranged to High Bulk Density at a Rate of up to 12 Bags / Minute.

NOTE: This machine is strictly intended for packaging free flowing high bulk density powders. It is NOT recommended for granular products or any kind of non-free flowing materials. All materials must be dry and of low humidity content to be used with this machine.

CBE 800 Series Vertical Impeller Packer

Examples of Proper Application Include:

Portland Cement, Mortar Mixes, Stucco, Grout
Gypsum, Barite

Principle of Operation:

The 800 Series has a specially Designed Vertical 4 blade impeller powered by a horizontal drive shaft. Product flows by gravity from the supply hopper into the product feed inlet at the top of the machine. When a fill cycle is initiated, the product is conveyed by opposing twin feed screws into the impeller which conveys the product into the bag.

Clean Operation:

The Model 800 Series has a totally enclosed product flow path from supply hopper all the way into the bag. It can also be equipped with our 112-100 dust collection manifold which can be ducted to your plants dust suppression system. Together with our optional 111 Tube Cleanout,117 Expanding Bag Seal Assemblies and a filling spout arrangement that is appropriately designed for your application, the 800 Series is the cleanest filling impeller style valve bag filler available on the market.

Technical Specifications:

Proper Application – High Bulk Density Powders
Weight Range – 20-110 lb. (9-50KG) Valve Bags
Fill Rate – 1-12 Bags Per Minute (Depending on Product Characteristics & Bag Sizing)
Typical Scale Weight Accuracy – +/- .5-1% of Target Weight (Depending on Product Characteristics, Bag Sizing and Options Selected)
Control Air – 80 PSI Required @ 1 CFM Per Bag Fill Cycle
Electrical – 220/440 Volt / 3 Ph / 60 Cycle (Step Down Transformer for 110V Control Voltage Included)
Dust Collection – 400 CFM Minimum (Base Model Does Not Include Dust Collection)

Standard Features:

Mild Steel Contacting Surfaces
Mechanical Scale Weighing
Scale Isolator Assembly
Tubular Steel Framework
4-Blade Impeller
7.5 HP Belt Drive Assembly
Manual Start/Stop Push Buttons
Air Operated Bag Clamp & Pinch Tube Material Cutoff
Adjustable Bag Rest
1.5” -2.75” Single Wall Fill Spout (Sized per Customer Requirements)
Replaceable Wear Liners
1 Year Limited Warranty

Available Options:

103-300 – Bulk & Dribble (Two-Stage) Cutoff (Only Available When Used w/ Option 104-400)
104-400 – Digital Load Cell Weighing
106-300 – Automatic Bag Discharger
109-712 – Digitally Variable Fast/Slow Speed Impeller (440-480V)
109-713 – Digitally Variable Fast/Slow Speed Impeller (220-240V)
111-000 – Tube Cleanout Assembly (Only Available When Used w/ Option 104-400)
112-100 – Dust Collection Pickup Manifold
115-000 – Auto Start Assembly
116-000 – Tapered Cone Dust Seal
117-000 – Timed Bag Seal Assembly
801-000 – Twin Feed Screws for Increased Product Flow & Feed to Impeller
802-800 – Quick Drop Bottom Cleanout Door Assembly w/ Safety Switch
820-000 – 304 S/S Material Contacting Surfaces
HF – Hard Faced Impeller